Hydraulic Nut HYDNUT260 Bearing Mounting And Dismounting Tool PriceSystems
| C1 max. | 20 mm |
| l4 max. | 149 mm |
| l7 min. | 36 mm |
| l5 ≈ | 19 mm |
| d2 max. | 75 mm |
| l3 min. | 45 mm |
| Mass rod end | 1 kg |
| G | M 30x2 |
| Basic dynamic load rating C | 93 kN |
| h1 | 110 mm |
How to Identify Hydraulic Nut HYDNUT260 Bearing Mounting And Dismounting Tool Price by Bearing Number
d:45.000 mm; D:75.0000 mm; Fillet Radius ra:1.00 mm; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:5600 rpm; Oil Speed Rating Open/Shielded n2:11000 rpm; Basic Dynamic Radial Load Rating C:23400 N; B:16.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating
Read More ...
Accessories:Two Seals; Oil Speed Rating n2:14000 rpm; B:22.20 mm; d:17.000 mm; Grease Speed Rating n1:11000 rpm; Sealed Speed Rating n3:11000 rpm; Basic Dynamic Radial Load Rating C:21600 N; Basic Static Radial Load Rating Co:12700 N; Fillet Radius ra:1.00 mm; D:47.0000 mm;
Read More ...
J1:107.95 mm; Cap bolt, SAE grade:8; A2:247.65 mm; Da:309.999 mm; P90°:207 kN; h:49.212 mm; R2:37.306 mm; Bearing:23040 CCK/W33; A1:171.45 mm; Mass pillow block:156 kg;
Read More ...
with tapered bore:2218 ; Grease:1.160 kN; Static (Cor):72.410 kN; d:90 mm; B:40 mm; B1:mm; D:160 mm; Pu:28.700 kN; Oil:3 800 min-1; with cylindrical bore:4 500 min-1;
Read More ...
H:338.137 mm; Cap bolt recommended tightening torque:813.5 N·m; PG:1/4 NPT; Adapter sleeve assembly:SNW 3038x6.13/16; R1:104.775 mm; Labyrinth ring:2 x LOR 153; Bearing:23038 CCK/W33; Stabilizing ring:2 x 38151-38; Housing:SAFS 038 KA; Da:289.999 mm;
Read More ...
D:70 mm; static Cor:75.500 kN; H:14 mm; dynamic Cr:32.260 kN; Grease:3 800 min-1; D1:52 mm; Oil:5 000 min-1; d:50 mm; Pu:3.430 kN; rs (min):0.6 mm;
Read More ...
Grease Speed Rating Open/Shielded n1:2600 rpm; d:95.000 mm; B:45.00 mm; Basic Static Radial Load Rating Co:180000 N; Basic Dynamic Radial Load Rating C:168000 N; Oil Speed Rating Open/Shielded n2:3200 rpm; Accessories:Without Accessories; D:200.0000 mm; Fillet Radius ra:2.50 mm;
Read More ...
Design (sliding contact surface combination):Steel/steel; ra max.:0.6 mm; dk:105 mm; r1 min.:0.6 mm; α:4 °; da max.:90 mm; D:120 mm; d1 ≈:90 mm; Specific dynamic load factor K:150 N/mm²; r2 min.:1 mm;
Read More ...
Mass bearing:7 kg; ra max.:2.5 mm; Limiting speed:4800 r/min; r1,2 min.:3 mm; r3,4 min.:3 mm; Da max.:165.5 mm; Fatigue load limit Pu:60 kN; Limiting value e:0.3; B:60 mm; F:108 mm;
Read More ...
l1 min.:92 mm; Material constant KM:330; B:32 mm; dk:60 mm; α:7 °; r1 min.:0.6 mm; Basic static load rating C0:200 kN; d2 max.:104 mm; d:45 mm; l2 max.:217 mm;
Read More ...
Basic Dynamic Radial Load Rating C:488000 N; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:1500 rpm; Basic Static Radial Load Rating Co:815000 N; Fillet Radius rb:1.00 mm; D:340.0000 mm; B:110.00 mm; Grease Speed Rating n1:1100 rpm; d:190.000 mm;
Read More ...
A2:215.9 mm; R2:39.688 mm; Labyrinth ring:2 x LOR 125; Housing:SAFS 530; J max.:463.55 mm; H1:160.35 mm; Appropriate attachment bolt size G:1 in; End plug (suffix Y):EPR 16; N1:28.575 mm; h:50.8 mm;
Read More ...
G:279.502 mm; Mass adapter sleeve assembly:20.5 kg; d:280 mm; Sleeve:S 3056x10.7/16; B:38.354 mm; d3 max.:330.327 mm; Locking plate:PL 56; Threads per inch:6; B5:47.092 mm; Lock nut:N 056;
Read More ...
d:25 mm; l7 min.:30 mm; l1 min.:53 mm; l2 max.:128 mm; Basic dynamic load rating C:72 kN; α:7 °; dk:35.5 mm; h:94 mm; Basic static load rating C0:78 kN; Specific dynamic load factor K:150 N/mm²;
Read More ...
Cb min.:5.5 mm; Limiting speed:8500 r/min; d1 ≈:57.3 mm; Basic dynamic load rating C:112 kN; B:29.771 mm; ra max.:3.5 mm; T:29.37 mm; Basic static load rating C0:110 kN; Da min.:65 mm; da max.:46 mm;
Read More ...
| Frequently bought Hydraulic Nut HYDNUT260 Bearing Mounting And Dismounting Tool Price together |
| T | G | K | C | L | N | h | a |
| TRX200 | - | - | - | - | - | - | - | - |
| 107-64-2 | - | - | - | - | - | - | - | - |
| E240 | 29.37 mm | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | 49.212 mm | - |
| G9000 | - | - | - | - | - | - | - | - |
| 3/4" | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | 94 mm | - |
| 180 | - | - | - | - | - | - | - | - |
| FZR750 | - | - | - | - | - | - | - | - |
| 6214 | - | - | - | - | - | - | - | - |
| 23188 | - | - | - | - | - | - | 50.8 mm | - |
| 90x190x64 | - | - | - | - | - | - | - | - |
| 4633472 | - | 279.502 mm | - | - | - | - | - | - |
| 5g | 77 mm | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - |
| 470-1464N*m | - | - | - | - | - | - | - | - |
| HK3516 | - | - | - | - | 190.5 mm | - | - | - |
| 2 | - | - | - | 48 mm | - | - | - | - |
| 1968-1970 | - | - | - | - | - | - | - | - |
| FVY1400 | - | - | - | 32 mm | - | - | - | - |
| [10 | - | - | - | - | - | - | - | - |
| NP300 | - | - | 3.5 mm | - | - | - | - | - |
| PS539700 | - | 89.586 mm | - | - | - | - | - | - |
| 33-0364 | - | - | - | - | - | - | - | - |
| 6304 | - | - | - | - | - | - | - | - |
| 23024-E1A-M | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - |
| 16007 | - | - | - | - | - | - | - | - |
| 12 | - | - | - | - | - | - | - | - |
| 100cc | - | - | - | - | - | - | - | - |
| A2601/1, | - | - | - | - | - | - | - | - |
| TB0295AS100AAAB,F999,WF13 | - | - | - | - | - | - | - | - |
| NA4906-XL | - | - | - | - | - | - | - | - |
| 2.0 | - | M 30x2 | - | - | - | - | - | - |
| (C/N-VT5005-17) | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - |
| m2g01506000nld060pa10 | - | - | - | - | 187.325 mm | - | - | - |
| 220g | - | - | - | - | - | - | - | - |
| EX250 | - | - | - | 71.425 mm | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - |
| 120ES | - | - | - | - | - | - | - | - |
| 6009ZZNR*AV2S | - | - | - | - | - | - | - | - |
| 55x90x18 | - | - | - | - | - | - | - | - |
| UCFU-1-1/4S | - | - | - | - | - | - | - | - |
| A25 | - | - | - | - | - | - | - | - |
| 6210 | - | - | - | - | - | - | - | - |
| 4140 | - | - | - | - | - | - | - | - |
| PC200-8 | - | - | - | - | - | - | - | - |
| A30 | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - |
| 609 | - | - | - | - | - | - | - | - |
| 708-3T-00161 | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | 628.65 mm | - | - | - |
| 4*8 | - | - | - | - | - | - | - | - |
| P2 | - | - | 12 mm | - | - | - | - | - |
| 3mm/3.2mm/4mm/6mm/9mm/12mm/15mm/18mm | - | - | - | - | - | - | 15.342 mm | - |
| 6005 | - | - | - | - | - | - | - | - |
| 50W | - | - | - | - | 330.2 mm | - | - | - |
| 30 | - | - | - | - | 711.2 mm | - | - | - |
| [100 | - | - | - | - | - | - | - | - |
| 4T-LM48510 | - | - | - | - | - | - | - | - |
| 6205 | - | - | - | - | - | - | - | - |
| 1216 | - | 54.788 mm | - | - | - | - | - | - |
| 4mm | - | - | - | - | - | - | - | - |
| (10 | - | - | - | - | - | 60 mm | - | - |
| 220g | - | - | - | - | - | - | - | - |
| 6022-2NSENR | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - |
| EC290B | 220 mm | - | - | - | - | - | - | - |
| 17X47X14 | - | - | - | - | - | - | - | - |
| 130HP | - | M 80x4 | - | - | - | - | - | - |
| PC200-8 | - | - | - | - | - | - | - | - |
| RKS.222605101001 | - | - | - | - | - | - | - | - |
| C18 | - | - | - | - | - | - | - | - |
| 9mm/12mm/15mm/18mm | - | - | - | - | - | - | - | - |
| 13 | - | - | - | - | - | - | - | - |
| N2JW | - | - | - | - | - | - | - | - |
| PC200-1 | - | - | - | - | - | - | - | - |
| PC450-8 | - | - | - | - | - | - | - | - |
| 50x | - | - | - | - | - | - | - | - |
| 3mm/3.2mm/4mm/6mm/9mm/12mm/15mm/18mm | - | - | - | - | - | - | - | - |
| 61906-2RZ | - | - | - | - | - | - | - | - |
| 280Z | 24.75 mm | - | - | - | - | - | - | 23.054 mm |
| 9-Way | - | - | 2.5 mm | - | - | - | - | 55 mm |
| 2x | - | M 120x2 | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - |
| 6201Z | - | - | - | - | - | - | - | - |
| (GLDT-0109821) | - | - | - | - | 285.75 mm | - | - | - |
| 9995 | - | - | - | - | - | - | - | - |
| EX200-1 | - | M 100x2 | - | - | - | - | - | - |
| PVD-2b-40 | - | - | - | - | - | - | - | - |
| V5-631-F24 | - | - | - | 16 mm | - | - | - | - |
| 3 | 40 mm | - | - | - | 95 mm | - | - | - |
| 5EB-11416-30-00 | - | - | - | - | - | - | - | - |
| 660 | - | - | - | - | - | - | - | - |
| HPV145 | - | - | - | - | - | - | - | - |
| TX20D19VM2BAB | - | - | - | - | - | - | - | - |
| A7VO250 | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - |
| A6 | - | - | - | - | - | - | - | - |
| AM115721 | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - |
| T6ec | - | - | - | - | - | - | - | - |
| 85X110X13TC-BX | - | - | - | - | - | - | - | - |
| Y-32-L | - | - | - | - | - | - | - | - |
| R46448 | - | - | - | 14 mm | - | - | - | - |
| 4) | - | - | - | - | - | - | - | - |
| pe600x900 | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - |
| 2mm/3mm/4mm | - | M 45x1.5 | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | 110 mm | - |
| 18mm | - | - | - | - | 749.3 mm | - | - | - |
| 18mm | - | M 160x3 | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - |
English
BEARING BOWER CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Hydraulic Nut HYDNUT1000 Bearing Mounting And Dismounting Tool Price
Hydraulic Nut HYDNUT850 Bearing Mounting And Dismounting Tool Price
Hydraulic Nut HYDNUT710 Bearing Mounting And Dismounting Tool Price
Hydraulic Nut HYDNUT650 Bearing Mounting And Dismounting Tool Price
Hydraulic Nut HYDNUT580 Bearing Mounting And Dismounting Tool Price