TLK130-170X225 Locking Assembly, Locking Device, Price

r2 min.:1.1 mm; da min.:126 mm; Design (sliding contact surface combination):Steel/steel; M:8 mm; dk:182.626 mm; D:196.85 mm; rb max.:1.1 mm; Da min.:173.5 mm; Material constant KM:330; da max.:138.4 mm;

Accessories:Two Seals; Oil Speed Rating n2:14000 rpm; B:22.20 mm; d:17.000 mm; Grease Speed Rating n1:11000 rpm; Sealed Speed Rating n3:11000 rpm; Basic Dynamic Radial Load Rating C:21600 N; Basic Static Radial Load Rating Co:12700 N; Fillet Radius ra:1.00 mm; D:47.0000 mm;

H:338.137 mm; Cap bolt recommended tightening torque:813.5 N·m; PG:1/4 NPT; Adapter sleeve assembly:SNW 3038x6.13/16; R1:104.775 mm; Labyrinth ring:2 x LOR 153; Bearing:23038 CCK/W33; Stabilizing ring:2 x 38151-38; Housing:SAFS 038 KA; Da:289.999 mm;

A2:215.9 mm; R2:39.688 mm; Labyrinth ring:2 x LOR 125; Housing:SAFS 530; J max.:463.55 mm; H1:160.35 mm; Appropriate attachment bolt size G:1 in; End plug (suffix Y):EPR 16; N1:28.575 mm; h:50.8 mm;

l1 min.:92 mm; Material constant KM:330; B:32 mm; dk:60 mm; α:7 °; r1 min.:0.6 mm; Basic static load rating C0:200 kN; d2 max.:104 mm; d:45 mm; l2 max.:217 mm;

G:279.502 mm; Mass adapter sleeve assembly:20.5 kg; d:280 mm; Sleeve:S 3056x10.7/16; B:38.354 mm; d3 max.:330.327 mm; Locking plate:PL 56; Threads per inch:6; B5:47.092 mm; Lock nut:N 056;

with tapered bore:2218  ; Grease:1.160 kN; Static (Cor):72.410 kN; d:90 mm; B:40 mm; B1:mm; D:160 mm; Pu:28.700 kN; Oil:3 800 min-1; with cylindrical bore:4 500 min-1;

Grease Speed Rating Open/Shielded n1:2600 rpm; d:95.000 mm; B:45.00 mm; Basic Static Radial Load Rating Co:180000 N; Basic Dynamic Radial Load Rating C:168000 N; Oil Speed Rating Open/Shielded n2:3200 rpm; Accessories:Without Accessories; D:200.0000 mm; Fillet Radius ra:2.50 mm;

Mass bearing:7 kg; ra max.:2.5 mm; Limiting speed:4800 r/min; r1,2 min.:3 mm; r3,4 min.:3 mm; Da max.:165.5 mm; Fatigue load limit Pu:60 kN; Limiting value e:0.3; B:60 mm; F:108 mm;

d:45.000 mm; D:75.0000 mm; Fillet Radius ra:1.00 mm; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:5600 rpm; Oil Speed Rating Open/Shielded n2:11000 rpm; Basic Dynamic Radial Load Rating C:23400 N; B:16.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating

d:25 mm; l7 min.:30 mm; l1 min.:53 mm; l2 max.:128 mm; Basic dynamic load rating C:72 kN; α:7 °; dk:35.5 mm; h:94 mm; Basic static load rating C0:78 kN; Specific dynamic load factor K:150 N/mm²;

Basic Dynamic Radial Load Rating C:488000 N; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:1500 rpm; Basic Static Radial Load Rating Co:815000 N; Fillet Radius rb:1.00 mm; D:340.0000 mm; B:110.00 mm; Grease Speed Rating n1:1100 rpm; d:190.000 mm;

Design (sliding contact surface combination):Steel/steel; ra max.:0.6 mm; dk:105 mm; r1 min.:0.6 mm; α:4 °; da max.:90 mm; D:120 mm; d1 ≈:90 mm; Specific dynamic load factor K:150 N/mm²; r2 min.:1 mm;

J1:107.95 mm; Cap bolt, SAE grade:8; A2:247.65 mm; Da:309.999 mm; P90°:207 kN; h:49.212 mm; R2:37.306 mm; Bearing:23040 CCK/W33; A1:171.45 mm; Mass pillow block:156 kg;

D:70 mm; static Cor:75.500 kN; H:14 mm; dynamic Cr:32.260 kN; Grease:3 800 min-1; D1:52 mm; Oil:5 000 min-1; d:50 mm; Pu:3.430 kN; rs (min):0.6 mm;