Hydraulic Nut HMVC 32E Bearing Mounting And Dismounting Tool PriceSystems
| da max. | 453 mm |
| d | 420 mm |
| Calculation factor kr | 0.21 |
| Fatigue load limit Pu | 465 kN |
| r3,4 min. | 4 mm |
| da min. | 436 mm |
| D | 580 mm |
| Limiting speed | 1100 r/min |
| Reference speed | 750 r/min |
| Mass bearing | 110 kg |
How to Identify Hydraulic Nut HMVC 32E Bearing Mounting And Dismounting Tool Price by Bearing Number
d:45.000 mm; D:75.0000 mm; Fillet Radius ra:1.00 mm; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:5600 rpm; Oil Speed Rating Open/Shielded n2:11000 rpm; Basic Dynamic Radial Load Rating C:23400 N; B:16.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating
Read More ...
Grease Speed Rating Open/Shielded n1:2600 rpm; d:95.000 mm; B:45.00 mm; Basic Static Radial Load Rating Co:180000 N; Basic Dynamic Radial Load Rating C:168000 N; Oil Speed Rating Open/Shielded n2:3200 rpm; Accessories:Without Accessories; D:200.0000 mm; Fillet Radius ra:2.50 mm;
Read More ...
Cb min.:5.5 mm; Limiting speed:8500 r/min; d1 ≈:57.3 mm; Basic dynamic load rating C:112 kN; B:29.771 mm; ra max.:3.5 mm; T:29.37 mm; Basic static load rating C0:110 kN; Da min.:65 mm; da max.:46 mm;
Read More ...
Basic Dynamic Radial Load Rating C:488000 N; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:1500 rpm; Basic Static Radial Load Rating Co:815000 N; Fillet Radius rb:1.00 mm; D:340.0000 mm; B:110.00 mm; Grease Speed Rating n1:1100 rpm; d:190.000 mm;
Read More ...
Design (sliding contact surface combination):Steel/steel; ra max.:0.6 mm; dk:105 mm; r1 min.:0.6 mm; α:4 °; da max.:90 mm; D:120 mm; d1 ≈:90 mm; Specific dynamic load factor K:150 N/mm²; r2 min.:1 mm;
Read More ...
d:25 mm; l7 min.:30 mm; l1 min.:53 mm; l2 max.:128 mm; Basic dynamic load rating C:72 kN; α:7 °; dk:35.5 mm; h:94 mm; Basic static load rating C0:78 kN; Specific dynamic load factor K:150 N/mm²;
Read More ...
l1 min.:92 mm; Material constant KM:330; B:32 mm; dk:60 mm; α:7 °; r1 min.:0.6 mm; Basic static load rating C0:200 kN; d2 max.:104 mm; d:45 mm; l2 max.:217 mm;
Read More ...
H:338.137 mm; Cap bolt recommended tightening torque:813.5 N·m; PG:1/4 NPT; Adapter sleeve assembly:SNW 3038x6.13/16; R1:104.775 mm; Labyrinth ring:2 x LOR 153; Bearing:23038 CCK/W33; Stabilizing ring:2 x 38151-38; Housing:SAFS 038 KA; Da:289.999 mm;
Read More ...
J1:107.95 mm; Cap bolt, SAE grade:8; A2:247.65 mm; Da:309.999 mm; P90°:207 kN; h:49.212 mm; R2:37.306 mm; Bearing:23040 CCK/W33; A1:171.45 mm; Mass pillow block:156 kg;
Read More ...
Mass bearing:7 kg; ra max.:2.5 mm; Limiting speed:4800 r/min; r1,2 min.:3 mm; r3,4 min.:3 mm; Da max.:165.5 mm; Fatigue load limit Pu:60 kN; Limiting value e:0.3; B:60 mm; F:108 mm;
Read More ...
G:279.502 mm; Mass adapter sleeve assembly:20.5 kg; d:280 mm; Sleeve:S 3056x10.7/16; B:38.354 mm; d3 max.:330.327 mm; Locking plate:PL 56; Threads per inch:6; B5:47.092 mm; Lock nut:N 056;
Read More ...
with tapered bore:2218 ; Grease:1.160 kN; Static (Cor):72.410 kN; d:90 mm; B:40 mm; B1:mm; D:160 mm; Pu:28.700 kN; Oil:3 800 min-1; with cylindrical bore:4 500 min-1;
Read More ...
Accessories:Two Seals; Oil Speed Rating n2:14000 rpm; B:22.20 mm; d:17.000 mm; Grease Speed Rating n1:11000 rpm; Sealed Speed Rating n3:11000 rpm; Basic Dynamic Radial Load Rating C:21600 N; Basic Static Radial Load Rating Co:12700 N; Fillet Radius ra:1.00 mm; D:47.0000 mm;
Read More ...
D:70 mm; static Cor:75.500 kN; H:14 mm; dynamic Cr:32.260 kN; Grease:3 800 min-1; D1:52 mm; Oil:5 000 min-1; d:50 mm; Pu:3.430 kN; rs (min):0.6 mm;
Read More ...
A2:215.9 mm; R2:39.688 mm; Labyrinth ring:2 x LOR 125; Housing:SAFS 530; J max.:463.55 mm; H1:160.35 mm; Appropriate attachment bolt size G:1 in; End plug (suffix Y):EPR 16; N1:28.575 mm; h:50.8 mm;
Read More ...
| Frequently bought Hydraulic Nut HMVC 32E Bearing Mounting And Dismounting Tool Price together |
| T | G | K | C | L | N | h | a |
| TRX200 | - | - | - | - | - | - | - | - |
| 107-64-2 | - | - | - | - | - | - | - | - |
| E240 | 29.37 mm | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | 49.212 mm | - |
| G9000 | - | - | - | - | - | - | - | - |
| 3/4" | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | 94 mm | - |
| 180 | - | - | - | - | - | - | - | - |
| FZR750 | - | - | - | - | - | - | - | - |
| 6214 | - | - | - | - | - | - | - | - |
| 23188 | - | - | - | - | - | - | 50.8 mm | - |
| 90x190x64 | - | - | - | - | - | - | - | - |
| 4633472 | - | 279.502 mm | - | - | - | - | - | - |
| 5g | 77 mm | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - |
| 470-1464N*m | - | - | - | - | - | - | - | - |
| HK3516 | - | - | - | - | 190.5 mm | - | - | - |
| 2 | - | - | - | 48 mm | - | - | - | - |
| 1968-1970 | - | - | - | - | - | - | - | - |
| FVY1400 | - | - | - | 32 mm | - | - | - | - |
| [10 | - | - | - | - | - | - | - | - |
| NP300 | - | - | 3.5 mm | - | - | - | - | - |
| PS539700 | - | 89.586 mm | - | - | - | - | - | - |
| 33-0364 | - | - | - | - | - | - | - | - |
| 6304 | - | - | - | - | - | - | - | - |
| 23024-E1A-M | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - |
| 16007 | - | - | - | - | - | - | - | - |
| 12 | - | - | - | - | - | - | - | - |
| 100cc | - | - | - | - | - | - | - | - |
| A2601/1, | - | - | - | - | - | - | - | - |
| TB0295AS100AAAB,F999,WF13 | - | - | - | - | - | - | - | - |
| NA4906-XL | - | - | - | - | - | - | - | - |
| 2.0 | - | M 30x2 | - | - | - | - | - | - |
| (C/N-VT5005-17) | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - |
| m2g01506000nld060pa10 | - | - | - | - | 187.325 mm | - | - | - |
| 220g | - | - | - | - | - | - | - | - |
| EX250 | - | - | - | 71.425 mm | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - |
| 120ES | - | - | - | - | - | - | - | - |
| 6009ZZNR*AV2S | - | - | - | - | - | - | - | - |
| 55x90x18 | - | - | - | - | - | - | - | - |
| UCFU-1-1/4S | - | - | - | - | - | - | - | - |
| A25 | - | - | - | - | - | - | - | - |
| 6210 | - | - | - | - | - | - | - | - |
| 4140 | - | - | - | - | - | - | - | - |
| PC200-8 | - | - | - | - | - | - | - | - |
| A30 | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - |
| 609 | - | - | - | - | - | - | - | - |
| 708-3T-00161 | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | 628.65 mm | - | - | - |
| 4*8 | - | - | - | - | - | - | - | - |
| P2 | - | - | 12 mm | - | - | - | - | - |
| 3mm/3.2mm/4mm/6mm/9mm/12mm/15mm/18mm | - | - | - | - | - | - | 15.342 mm | - |
| 6005 | - | - | - | - | - | - | - | - |
| 50W | - | - | - | - | 330.2 mm | - | - | - |
| 30 | - | - | - | - | 711.2 mm | - | - | - |
| [100 | - | - | - | - | - | - | - | - |
| 4T-LM48510 | - | - | - | - | - | - | - | - |
| 6205 | - | - | - | - | - | - | - | - |
| 1216 | - | 54.788 mm | - | - | - | - | - | - |
| 4mm | - | - | - | - | - | - | - | - |
| (10 | - | - | - | - | - | 60 mm | - | - |
| 220g | - | - | - | - | - | - | - | - |
| 6022-2NSENR | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - |
| EC290B | 220 mm | - | - | - | - | - | - | - |
| 17X47X14 | - | - | - | - | - | - | - | - |
| 130HP | - | M 80x4 | - | - | - | - | - | - |
| PC200-8 | - | - | - | - | - | - | - | - |
| RKS.222605101001 | - | - | - | - | - | - | - | - |
| C18 | - | - | - | - | - | - | - | - |
| 9mm/12mm/15mm/18mm | - | - | - | - | - | - | - | - |
| 13 | - | - | - | - | - | - | - | - |
| N2JW | - | - | - | - | - | - | - | - |
| PC200-1 | - | - | - | - | - | - | - | - |
| PC450-8 | - | - | - | - | - | - | - | - |
| 50x | - | - | - | - | - | - | - | - |
| 3mm/3.2mm/4mm/6mm/9mm/12mm/15mm/18mm | - | - | - | - | - | - | - | - |
| 61906-2RZ | - | - | - | - | - | - | - | - |
| 280Z | 24.75 mm | - | - | - | - | - | - | 23.054 mm |
| 9-Way | - | - | 2.5 mm | - | - | - | - | 55 mm |
| 2x | - | M 120x2 | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - |
| 6201Z | - | - | - | - | - | - | - | - |
| (GLDT-0109821) | - | - | - | - | 285.75 mm | - | - | - |
| 9995 | - | - | - | - | - | - | - | - |
| EX200-1 | - | M 100x2 | - | - | - | - | - | - |
| PVD-2b-40 | - | - | - | - | - | - | - | - |
| V5-631-F24 | - | - | - | 16 mm | - | - | - | - |
| 3 | 40 mm | - | - | - | 95 mm | - | - | - |
| 5EB-11416-30-00 | - | - | - | - | - | - | - | - |
| 660 | - | - | - | - | - | - | - | - |
| HPV145 | - | - | - | - | - | - | - | - |
| TX20D19VM2BAB | - | - | - | - | - | - | - | - |
| A7VO250 | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - |
| A6 | - | - | - | - | - | - | - | - |
| AM115721 | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - |
| T6ec | - | - | - | - | - | - | - | - |
| 85X110X13TC-BX | - | - | - | - | - | - | - | - |
| Y-32-L | - | - | - | - | - | - | - | - |
| R46448 | - | - | - | 14 mm | - | - | - | - |
| 4) | - | - | - | - | - | - | - | - |
| pe600x900 | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - |
| 2mm/3mm/4mm | - | M 45x1.5 | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | 110 mm | - |
| 18mm | - | - | - | - | 749.3 mm | - | - | - |
| 18mm | - | M 160x3 | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - |
English
BEARING BOWER CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Hydraulic Nut HMVC 126E Bearing Mounting And Dismounting Tool Price
30 mm x 47 mm x 9 mm Hydraulic Nut HMVC 44E Bearing Mounting And Dismounting Tool Price
Hydraulic Nut HMV 74E Bearing Mounting And Dismounting Tool Price
25 mm x 52 mm x 15 mm Hydraulic Nut HMV 26E Bearing Mounting And Dismounting Tool Price
25 mm x 47 mm x 12 mm TLK601 440X660 Shrink Disc Price